GAN Square-1 (Magnetic, MagLev, Core Magnets, UV Coated)
The GAN Square-1 (Magnetic, MagLev, Core Magnets, UV Coated) takes the shape-shifting Square-1 puzzle and gives it GAN's full flagship treatment. Because a Square-1 changes shape as you solve, clean layer alignment matters more than it does on a 3x3, and this cube is built around exactly that: a 36-magnet system pulls every turn into place, while MagLev tensioning swaps springs for a light, quiet slide.
Why you'll like it
- Flagship tech on a Square-1: the same class of MagLev tensioning and magnetic alignment GAN builds into its top 3x3s, applied to a shape-shifting puzzle that usually goes without it.
- Snappy, accurate turns: the magnet system pulls each layer into position so shapes resolve cleanly and lockups stay rare, even at speed.
- Set it once, keep it: a numbered tuning system lets you dial in a feel and return to it exactly, with no guesswork.
- Holds up to hard solving: reinforced internals resist pops so the cube stays together when you push the pace.
- A bigger challenge than a 3x3: the Square-1 shifts shape as you turn, opening up 11.9 trillion possible states to work through.
Tuning & control
- Numerical Magnetic GES system: 6 gears of tension and 6 gears of center-piece travel combine into 36 setups, each marked with a clear number so you always know where you are.
- Repeatable by design: because every setting is numbered, you can note your preferred feel and reset to it precisely after any change.
- One-twist setup: a dedicated tuning tool is included, so adjusting tension or travel takes a single twist instead of a fiddly teardown.
Performance & design highlights
- 36-magnet matrix: 32 inter-piece magnets drive 30° auto-alignment for faster, more accurate positioning, while 4 core magnets handle the 180° slash and snap it in instantly.
- MagLev tensioning: repelling magnets stand in for springs, cutting friction and spring noise for a light glide through every slash.
- Dual-foot structure: a reworked contact design adds stability over a single-foot build and, per GAN, cuts frictional resistance by 30% versus a triple-foot structure.
- Anti-pop internals: a reinforced center cap post and slide-lock splicing keep pieces seated during fast, aggressive turning.
- UV Coated finish: a glossy, high-grip exterior paired with a honeycomb contact face that spreads lubricant evenly for a consistent turn.
Specs at a glance
- Puzzle type: Square-1 (shape-shifting layered puzzle)
- Magnets: 36 total (32 inter-piece + 4 core)
- Tensioning: MagLev (magnetic levitation)
- Tuning: Magnetic GES, 36 numerical settings (6 tension x 6 center travel)
- Auto-alignment: 30° layer alignment, 180° slash alignment
- Finish: UV Coated, stickerless
- Size: 54 x 54 x 56 mm (L x W x H)
- Weight: 80 g
- Included: dedicated tuning tool
Best fit for cubers who want a Square-1 that turns with the same confidence as a modern flagship 3x3.
Original: $44.95
-65%$44.95
$15.73More Images
GAN Square-1 (Magnetic, MagLev, Core Magnets, UV Coated)
The GAN Square-1 (Magnetic, MagLev, Core Magnets, UV Coated) takes the shape-shifting Square-1 puzzle and gives it GAN's full flagship treatment. Because a Square-1 changes shape as you solve, clean layer alignment matters more than it does on a 3x3, and this cube is built around exactly that: a 36-magnet system pulls every turn into place, while MagLev tensioning swaps springs for a light, quiet slide.
Why you'll like it
- Flagship tech on a Square-1: the same class of MagLev tensioning and magnetic alignment GAN builds into its top 3x3s, applied to a shape-shifting puzzle that usually goes without it.
- Snappy, accurate turns: the magnet system pulls each layer into position so shapes resolve cleanly and lockups stay rare, even at speed.
- Set it once, keep it: a numbered tuning system lets you dial in a feel and return to it exactly, with no guesswork.
- Holds up to hard solving: reinforced internals resist pops so the cube stays together when you push the pace.
- A bigger challenge than a 3x3: the Square-1 shifts shape as you turn, opening up 11.9 trillion possible states to work through.
Tuning & control
- Numerical Magnetic GES system: 6 gears of tension and 6 gears of center-piece travel combine into 36 setups, each marked with a clear number so you always know where you are.
- Repeatable by design: because every setting is numbered, you can note your preferred feel and reset to it precisely after any change.
- One-twist setup: a dedicated tuning tool is included, so adjusting tension or travel takes a single twist instead of a fiddly teardown.
Performance & design highlights
- 36-magnet matrix: 32 inter-piece magnets drive 30° auto-alignment for faster, more accurate positioning, while 4 core magnets handle the 180° slash and snap it in instantly.
- MagLev tensioning: repelling magnets stand in for springs, cutting friction and spring noise for a light glide through every slash.
- Dual-foot structure: a reworked contact design adds stability over a single-foot build and, per GAN, cuts frictional resistance by 30% versus a triple-foot structure.
- Anti-pop internals: a reinforced center cap post and slide-lock splicing keep pieces seated during fast, aggressive turning.
- UV Coated finish: a glossy, high-grip exterior paired with a honeycomb contact face that spreads lubricant evenly for a consistent turn.
Specs at a glance
- Puzzle type: Square-1 (shape-shifting layered puzzle)
- Magnets: 36 total (32 inter-piece + 4 core)
- Tensioning: MagLev (magnetic levitation)
- Tuning: Magnetic GES, 36 numerical settings (6 tension x 6 center travel)
- Auto-alignment: 30° layer alignment, 180° slash alignment
- Finish: UV Coated, stickerless
- Size: 54 x 54 x 56 mm (L x W x H)
- Weight: 80 g
- Included: dedicated tuning tool
Best fit for cubers who want a Square-1 that turns with the same confidence as a modern flagship 3x3.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The GAN Square-1 (Magnetic, MagLev, Core Magnets, UV Coated) takes the shape-shifting Square-1 puzzle and gives it GAN's full flagship treatment. Because a Square-1 changes shape as you solve, clean layer alignment matters more than it does on a 3x3, and this cube is built around exactly that: a 36-magnet system pulls every turn into place, while MagLev tensioning swaps springs for a light, quiet slide.
Why you'll like it
- Flagship tech on a Square-1: the same class of MagLev tensioning and magnetic alignment GAN builds into its top 3x3s, applied to a shape-shifting puzzle that usually goes without it.
- Snappy, accurate turns: the magnet system pulls each layer into position so shapes resolve cleanly and lockups stay rare, even at speed.
- Set it once, keep it: a numbered tuning system lets you dial in a feel and return to it exactly, with no guesswork.
- Holds up to hard solving: reinforced internals resist pops so the cube stays together when you push the pace.
- A bigger challenge than a 3x3: the Square-1 shifts shape as you turn, opening up 11.9 trillion possible states to work through.
Tuning & control
- Numerical Magnetic GES system: 6 gears of tension and 6 gears of center-piece travel combine into 36 setups, each marked with a clear number so you always know where you are.
- Repeatable by design: because every setting is numbered, you can note your preferred feel and reset to it precisely after any change.
- One-twist setup: a dedicated tuning tool is included, so adjusting tension or travel takes a single twist instead of a fiddly teardown.
Performance & design highlights
- 36-magnet matrix: 32 inter-piece magnets drive 30° auto-alignment for faster, more accurate positioning, while 4 core magnets handle the 180° slash and snap it in instantly.
- MagLev tensioning: repelling magnets stand in for springs, cutting friction and spring noise for a light glide through every slash.
- Dual-foot structure: a reworked contact design adds stability over a single-foot build and, per GAN, cuts frictional resistance by 30% versus a triple-foot structure.
- Anti-pop internals: a reinforced center cap post and slide-lock splicing keep pieces seated during fast, aggressive turning.
- UV Coated finish: a glossy, high-grip exterior paired with a honeycomb contact face that spreads lubricant evenly for a consistent turn.
Specs at a glance
- Puzzle type: Square-1 (shape-shifting layered puzzle)
- Magnets: 36 total (32 inter-piece + 4 core)
- Tensioning: MagLev (magnetic levitation)
- Tuning: Magnetic GES, 36 numerical settings (6 tension x 6 center travel)
- Auto-alignment: 30° layer alignment, 180° slash alignment
- Finish: UV Coated, stickerless
- Size: 54 x 54 x 56 mm (L x W x H)
- Weight: 80 g
- Included: dedicated tuning tool
Best fit for cubers who want a Square-1 that turns with the same confidence as a modern flagship 3x3.
